Publications

2015

Seifi, S.M., Dahar, M., Aman, R., Harrysson, O., Beuth, J.L., and Lewandowski, J.J. (2015). “Influence of Test Orientation and Build Direction on Fracture and Fatigue Crack Propagation Behavior of As-deposited EBAM Ti-6Al-4V”, JOM, 67(3), pp. 597-606.
 
Yi, J., Wang, W.H., and Lewandowski, J.J. (2015). “Guiding and Deflecting Cracks in Bulk Metallic Glasses to Increase Damage Tolerance”, Advanced Eng. Matl’s, 17(5), pp. 620-625.
 
Neilson, H.J., Peterson, A., Cheung, A.M., Poon, S.J., Shiflet, G.J., Widom, M. and Lewandowski, J.J. (2015). “Weibull Modulus of Hardness, Bend Strength, and Tensile Strength of Ni-Ta-Co-X Metallic Glass Ribbons”, Matl’s Sci. and Eng. A, 634, pp. 176-182.
 
Yi, J., Wang, W.H, and Lewandowski, J.J. (2015). “Sample Size and Preparation Effects on Plasticity of Metallic Glass”. Acta Mater., 87, pp. 1-7.
 
Lewandowski, J.J. and Vatamanu, O.L. (2015). “Pressure and Temperature Effects on Flow and Fracture of Metallic Glasses – Implications for Deformation Processing”, Scripta Materialia, in preparation.
 
El-Shabasy A.B., and Lewandowski, J.J. (2015).  “Annealing Effects on the High Cycle Fatigue of Zr-Based Metallic Glasses”,  Materials Science and Engineering A, in preparation.
 
Seifi, S.M., Brosi, J.K., and Lewandowski, J.J. (2015). “Effects of Thermal Exposures, Remediation Treatments, and Test Conditions on Delamination on Commercial Al-Mg Alloys”, Materials Transactions A,  in preparation.
 
Gbur, J. and Lewandowski, J.J. (2015) “Fracture and Fatigue of Wires and Cables Used in the Biomedical Industry”, International Materials Reviews,  in revision.
 
Hassan, H.A., Hellier, A.K., Crosky, A.G., and Lewandowski, J.J. (2015). “Fracture Toughness of Cast and Extruded Al6061/15%/Al2O3p Metal Matrix Composites”, Materials Science and Engineering A,  in preparation.
 
Tuttle, R., Lewandowski, J., and Tomazin, R. (2015). “Effect of Rare Earth Oxides on the Rolling Performance on Grain Refined 1030”,  AISTech 2015 Proceedings, pp. 3461-3471.
 
Booth, J.A., Carter, J.L.W., and Lewandowski, J.J. (2015). “Effects of Changes in Test Temperature on Tensile Properties and Notched vs. Fatigue Precracked Toughness of a Zr-based BMG Composite”, Materials Science and Engineering, in preparation.
 
Neilson, H.J., Carter, J.L.W., and Lewandowski, J.J. (2015). “An Improved Method for Calculation of Elastic Constants of Metallic Glasses”, Matl’s Sci. and Eng. A, 634, pp. 183-187.
 
Hassan, H.A. and Lewandowski, J.J. (2015). “Properties of Discontinuously-Reinforced MMCs and Laminates”, Reference Module in Materials Science and Engineering, Elsevier, in press.
 
Seifi, M., Samimi, P., Ghamarian, I., Collins, P.C., and Lewandowski, J.J. (2015). “Grain Orientation Effects on Grain Boundary Delamination During Fatigue of a Sensitized  Al-Mg Alloy”, Phil. Mag. Letters, in press.
 
Seifi, M., Li, D., Yong, Z., Liaw, P., and Lewandowski, J.J. (2015). “Fracture Toughness and Fatigue Crack Growth Behavior of As-cast High Entropy Alloys”, JOM, in press.
 
Seifi, M., Ghamarian, I., Samimi, P., Ackelid, A.C., Collins, P.C., and Lewandowski, J.J. (2015). “Microstructure and Mechanical Properties of Ti-48Al-2Cr-2Nb Produced via Electron Beam Melting”, Proceedings of International Conference on Ti Alloys, in press.
 
Seifi, M., Christiansen, D. Harrysson, O., Beuth, J., and Lewandowski, J.J. (2015). “Process Mapping and Fracture and Fatigue Behavior of Ti-6Al-4V Made by Additive Manufacturing”, Proceedings of International Conference on Ti Alloys, in press.
 
Li, D.Y., Feng, T., Sha, G., Lewandowski, J.J., Liaw, P.K., and Zhang, Y. (2015). “High Entropy Alloy Wires of Al0.3CoCrFeNi with High Tensile Strength and Ductility at Cryogenic Temperature”, Acta Materialia, submitted.
 
Aydogan, E., Odette, G.R., Anderson, I.E., Rieken, J., Lewandowski, J.J. and Maloy, S.A. (2015). “Effects of Tube Processing Methods on the Texture and Grain Boundary Characteristics of 14YWT Nanostructured Ferritic Alloys”, in preparation.
 
Peterson, A.S., Cheung, A.M., Poon, S.J., Shiflet, G.J., Neilson, H.J., and Lewandowski, J.J. (2015). “Compaction of Ni-Based Bulk Metallic Glass via SPS of Pulverized Amorphous Ribbons”, Scripta Materialia, submitted

2014

Lavvafi, H., Lewandowski, J.R., and Lewandowski, J.J. (2014). “Flex Bending Fatigue of Wires and Ribbons”, Materials Science and Engineering A, 601, pp. 123-130.
 
Yi, J., Seifi, S.M., Wang, W.H., and Lewandowski, J.J. (2014). “A Damage-tolerant Bulk Metallic Glass at Liquid-Nitrogen Temperature”, Jnl Matl’s Sci. Tech.,  30(6),  pp. 627-630.
 
Huhn, W. P., Widom, M., Cheung, A. M., Shiflet, G. J., Poon, S. J., and Lewandowski, J. (2014). “First Principles Calculation of Elastic Moduli of Early-Late Transition Metal Alloys”, Phys. Rev. B, 89, 104103.
 
Hassan, H.A. and Lewandowski, J.J. (2014) “Effects of Particulate Volume Fraction on Cyclic Stress Response and Fatigue Life of AZ91D Magnesium Alloy Metal Matrix Composites”, Materials Science and Engineering A, 600, pp. 188-194.
 
Dahar, M., Seifi, S.M., Bewlay, B.P., and Lewandowski, J.J. (2014). “Effects of Test Orientation on Fracture and Fatigue Crack Growth of Ti-48Al-2Nb-2Cr”, Intermetallics, 57, pp. 73-82.
 
Gong, H., Gu, H., Zeng, K., Dilip, J.J.S., Pal, D., Stucker, B., Christiansen, D. Beuth, J., Lewandowski, J.J., “Melt Pool Characterization for Selective Laser Melting of Ti-6Al-4V Pre-alloyed Powder”, Proc. Sold Freeform Fabrication Symposium, Austin, TX, August 13, 2014.

2013

Hassan, H.A., El-Shabasy A.B., and Lewandowski, J.J. (2013).  “The Effect of Mixed Mode I/II on the Fracture Toughness and Fracture Behavior of Nano-structured Metal Matrix Composites”,  Materials Science and Engineering A, 559, pp. 897-901.
 
Lewandowski, J.J. (2013). “Modern Fracture Mechanics”, Philosophical Magazine – Special Issue in Honour of Sir Alan Cottrell, 93(28-30), pp. 3893-3906.
 
Sunny, G., Lewandowski, J.J., and Prakash, V. (2013). “Dynamic Fracture of a Zr-based Bulk Metallic Glass”, Materials Transactions A44A(10), pp. 4644-4653.
 
Vatamanu, L.O. and Lewandowski, J.J. (2013). “Pressure and Temperature Effects on Tensile Strength and Plasticity of Metallic Glasses”, Mechanics of Materials, 67, pp. 86-93.
 
Hassan, H.A. and Lewandowski, J.J. (2013).  “Effects of Mixed Mode Loading on the Fracture Toughness of Bulk Metallic Glass/W Composites”, Materials Science and Engineering A, 586, pp. 413-417.
2012
 
Deibler, L.A. and Lewandowski, J.J. (2012). “Model Experiments to Mimic Fracture Surface Features of Metallic Glasses: Effects of External Confining Medium”, Materials Science and Engineering A,  A538, pp. 259-264.
 
Huang, C.K., and Lewandowski, J.J. (2012). “Effects of Changes in Chemistry on the Flex bending Fatigue Behavior of  Al-based Amorphous Alloy Ribbons”, Metallurgical and Materials Tranactions A,  43(8), pp. 2687-2696.
 
El-Shabasy, A.B., Hassan, H.A., and Lewandowski, J.J. (2012). “Effects of Composition Changes  on Strength, Bend Ductility, Toughness, and Flex Bending Fatigue of Iron Based  Metallic Glass Ribbons”, Metallurgical and Materials Transactions A, 43(8), pp. 2697-2705.
 
Hassan, H.A., El-Shabasy A.B., and Lewandowski, J.J. (2012).  “The Effects of Changes in Test Temperature and Loading Conditions on Fracture Toughness of a Beta Toughened Zr-based Bulk Metallic Glass Composite”,  Materials Science and Engineering A, 540, pp. 97-101.
 
El-Shabasy A.B., and Lewandowski, J.J. (2012).  “The Effects of Load Ratio and Test Temperature on High Cycle Fatigue of Nano-crystalline Aluminum Composites”,  Materials Science and Engineering A, 558, pp. 211-216.
 
Brosi, J.K., Seifi, S.M., and Lewandowski, J.J. (2012). “Delamination of Sensitized Al-Mg Alloy During Fatigue Crack Growth in Air”, Materials Transactions A, 43A(11), pp. 3952-2956.
 
Wang, D., Khan, H., Lewandowski, J.J., Ernst, F., Michal, G.M., and Heuer, A.H. (2012). “Sustained Load Crack Growth of Interstitially Hardened AISI 316L Stainless Steel after Gaseous Hydrogen Charging”, Materials Science and Engineering A, 556, pp. 43-50.
 
Rajani, B., Lewandowski, J., and Margevicius, A. (2012). “Failure Analysis of Cast Iron Trunk Main in Cleveland, Ohio”, Journal of Failure Analysis and Prevention, 12, pp. 217-236.
 
Madge, S.V., Louzguine-Luzgin, D.V., Lewandowski, J.J., and Greer, A.L. (2012).  “Toughness, Extrinsic Effects and Poisson’s Ratio of Bulk Metallic Glasses”, Acta Mater., 60, pp. 4800-4809.
 
2011
 
Tang, X., Prakash, V., and Lewandowski, J.J. (2011). "Effects of Microstructure on High Strain Rate Deformation and Flow Behaviour of Al-Mg-Si (AA-6061) Under Uniaxial Compression and Combined Compression and Shear Loading",  Materials Science and Technology, 27(1), pp. 13-20.
 
Robinson, L.,  Mishra, B.,  Lados, D.,  Lewandowski, J.J.,  Peterson, R.D., Spanos, G. (2011).   
 
“Challenges, Opportunities, and Possibilities: An Update on the TMS Energy Materials Study” Journal of Materials,  63(7), pp. 11-12.
 
2010
 
Caris, J.B. and Lewandowski, J.J. (2010). “Pressure Effects on Metallic Glasses”, Acta Materialia, 58(3), pp. 1026-1036.
 
Varadarajan, R., Thurston, A.K., and Lewandowski, J.J. (2010). “Increased Toughness of Zirconium Based Bulk Metallic Glasses Tested Under Mixed Mode Conditions”, Materials Transactions A, 41A, pp. 149-158.
 
Gu, X.J., Poon, S.J., Shiflet, G.J., and Lewandowski, J.J. (2010). “Compressive Plasticity and Toughness of a Ti-BMG”, Acta Materialia, 58, pp. 1708–1720.
 
El-Shabasy, A.B. and  Lewandowski, J.J. (2010). “Fatigue Coaxing Experiments on a Zr-BMG”, Scripta Materialia, 62, pp. 481-484.
 
Deibler, L. and Lewandowski, J.J. (2010). “Effects of Changes in Strain Rate and Test Temperature on Mg85Ca5Cu10 Metallic Glass Ribbons”, Materials Sci. and Eng. A, A527, pp. 2214-2221.
 
Deibler, L. and Lewandowski, J.J. (2010). “Model Experiments to Mimic Fracture Surface  Features in Metallic Glasses”, Materials Sci. and Eng. A, A527, pp. 2207-2213.
 
Caris, J., Li, D., Stephens, J.J., and Lewandowski, J.J. (2010). “Microstructural Effects on Tension Behavior of Cu-15Ni-8Sn Sheet”, Matls Sci and Eng. A,  A527(3), pp. 769-781.
 
Liu, Y. and Lewandowski, J.J. (2010). “Microstructural Effects on Crack Path Selection in Bending and Fatigue in a Nb-19Si-5Cr-3.5Hf-0.75Sn-1W Alloy”, Materials Science and Engineering A, A527, pp. 1489 - 1500.
 
Varadarajan, R. and Lewandowski, J.J. (2010). “Stress State Effects on the Fracture of a Zr-Ti-Ni-Cu-Be Bulk Metallic Glass”, Materials Transactions A, 41A(7), pp. 1758-1766.
 
Brosi, J.K.  and Lewandowski, J.J. (2010). “Delamination of a Sensitized Commercial Al-Mg Alloy During Fatigue Crack Growth”, Scripta Materialia, 63, pp. 799-802.
 
Huang, C.K., and Lewandowski, J.J. (2010). “Effects of Changes in Chemistry and Testing Temperature on Mechanical Behavior of Al-based Amorphous Alloy Ribbons”, Metallurgical and Materials Tranactions A, 41A(9), pp.  2269-2275.
 
Yuan, F.P, Prakash, V., and Lewandowski, J.J. (2010). “Shear Yield and Flow Behavior of a Zirconium-based Bulk Metallic Glass”, Mech. of Materials, 42(3), pp. 248-255.
 
2009
 
Delgado, I.R., Steinetz, B.M., Rimnac, C.M., and Lewandowski, J.J. (2009). “Fatigue Crack Growth Behavior Evaluation of Grainex Mar-M 247 for NASA’s High Temperature, High Speed Turbine Seal Test Rig”, Jrnl of Engineering for Gas Turbines and Power, 131(2), pp. 1-1 – 1-12.
 
Shamimi Nouri, A., Liu, Y., and Lewandowski, J.J. (2009). “Effects of Thermal Exposure and  Test Temperature on Structure Evolution and Hardness/Viscosity of an Iron-Based Metallic Glass”, Materials Transactions A,  40A(6), pp. 1314 -  1323.
 
El-Shabasy, A.B. and  Lewandowski, J.J. (2009). “Effect of Microstructural Changes, Loading Conditions, and Test Temperature on Toughness of Fully Pearlitic Eutectoid Steel Used in the Transportation Industry”, Materials Science and Technology, 25(3), pp. 369-378.
 
Sunny, G., Yuan, F., Prakash, V., and Lewandowski, J.J. (2009). “Design of Inserts for Split-Hopkinson Pressure Bar Testing of Low Strain-to-Failure Materials”, Experimental Mechanics, 49(4), pp. 479-490.
 
Yuan, F., Prakash, V., and Lewandowski, J.J. (2009). “Spall Strength of a Zirconium-based Bulk Metallic Glass under Shock-Induced Compression-and-Shear Loading”, Mech. of Materials, 41(7), pp. 886-897.
 
Gu, X.J., Poon, S.J., Shiflet, G.J., and Lewandowski, J.J. (2009). “Ductile-to-brittle transition in a Ti-based bulk metallic glass”, Scripta Materialia, 60, pp. 1027-1030.
 
Pitkin, M., Raykhtsaum, G., Pilling, J., Shukeylo, Y., Moxson, V., Duz, V., Lewandowski, J., Connolly, R., Prilutsky, B., Dalton, J., Jacobson, S. (2009).  “Mathematical Modeling, Mechanical and Histopathology Testing of the Porous Prosthetic Pylon for Direct Skeletal Attachment”,  Journal of Rehabilitation Research and Development, 46(3), pp. 315-330.
 
Sunny, G., Prakash, V., and Lewandowski, J (2009). “Dynamic Fracture of a Zr-based Bulk Metallic Glass”, in Proceedings of the SEM Annual Conference, June 1-4, 2009, Albequerque, NM, Soc. For  Expt. Mechanics, Inc.
 
Sunny, G., Yuan, F., Prakash, V., and Lewandowski, J (2009). “Effects of Strain Rate and Pressure in a Zr-based Bulk Metallic Glass”, in Proceedings of the SEM Annual Conference, June 1-4, 2009, Albequerque, NM, Soc. For  Expt. Mechanics, Inc.
 
Hassan, H.A. and Lewandowski, J.J. (2009) “Laminated Nanostructure Composite with Improved Bend Ductility and Toughness”, Scripta Mater. 61, pp. 1072–1074.
 
El-Shabasy, A., Hassan, H.A., Liu, Y, and Lewandowski, J.J. (2009). “High Cycle Fatigue Behavior of a Nanostructured Composite Produced Via Extrusion of Amorphous Al-Gd-Ni-Fe Alloy Powders”, Materials Sci. and Eng. A, 513-514, pp. 202-207.
 
Herman, D.M., Bewlay, B.P., Cretagny, L., DiDomizio, R. and Lewandowski, J.J. (2009). “Fracture and Fatigue of Niobium Silicide Alloys” in Advanced Intermetallic Alloys for Extreme Environment and Energy Applications – MRS Proceedings, Vol. 1128, pp. 395-406.
 
Hassan, H.A., El-Shabasy, A.B., and Lewandowski, J.J. (2009). “Putting the Heat on Nano-composite Aluminum Alloys”, Metal Powder Report, 64(5), pp. 28-34.
 
2008
 
Wesseling, P., Ko, B.C., Vatamanu, L.O., Shiflet, G.J., and Lewandowski, J.J. (2008). “Effects of Annealing and Pressure on Devitrification and Mechanical Properties of Amorphous Al87Ni7Gd6  “, Materials Transactions A, 39A(8), pp. 1935-1941.
 
Vormelker, A.H., Vatamanu, O.L., Kecskes, L., and  Lewandowski, J.J. (2008).  “Effects of Test Temperature and Loading Conditions on the Tensile Properties of a Zr-based Bulk Metallic Glass”, Materials Transactions A, 39A(8), pp. 1922-1934.
 
Lewandowski, J.J., Varadarajan, R., Smith, B., Tuma, C., Shazly, M., and Vatamanu, L.O. (2008).   “Tension and Fatigue Behavior of 316LVM 1x7 Multi-strand Cables used as Implantable Electrodes”,  Materials Science and Engineering A, 486(1-2), pp. 447-454.
 
Osman, T.M., Hassan, H.A., and Lewandowski, J.J. (2008). “Interface Effects on the Quasi-static and Impact Toughness of Discontinuously Reinforced Aluminum Laminates”, Materials Transactions A, 39A(8), pp. 1993-2006.
 
Hassan, H.A., Kecskes, L., and Lewandowski, J.J. (2008). “Effects of Changes in Test Temperature and Loading Conditions on Fracture Toughness of a Zr-based Bulk Metallic Glass”, Materials Transactions A, 39A(9), pp. 2077-2085.
 
Lewandowski, J.J., Gu, X.J., Shamimi Nouri, A., Poon, S.J., and Shiflet, G.J. (2008). “Tough Fe-based Bulk Metallic Glasses”, Applied Physics Letters, 92(9), pp. 09198-1 – 091918-3.
 
Hassan, H.A., and Lewandowski, J.J. (2008). “Effects of Changes in Notch Radius and Test Temperature on the Toughness of a Nano-crystalline Aluminum Alloy Composite”, Materials Science and Engineering A, 497(1-2), pp. 212–215.
 
Caris, J.B., Varadarajan, R., and Lewandowski, J.J. (2008). “Microstructural Effects on Tension and Fatigue Behavior of Cu-15Ni-8Sn Sheet”, Matls Sci. & Eng. A, 491(1-2), pp. 137-146.
 
Lewandowski, J.J. , Varadarajan, R.,  and Smith, B. (2008). “Tension and Fatigue Behavior of Silver-cored Composite Multi-strand Cables Used as Implantable Cables and Electrodes”, Materials Science and Engineering A, 492, pp. 191-198.
 
Shamimi Nouri, A., Gu, X.J., Poon, S.J., Shiflet, G.J., and Lewandowski, J.J. (2008). “Chemistry (Intrinsic) and Inclusion (Extrinsic) Effects on the Toughness and Weibull Modulus of Fe-Based Bulk Metallic Glasses”, Philosophical Magazine Letters, 88(11), pp. 853-861.
 
Yuan, F., Prakash, V., and Lewandowski, J.J. (2008). “Spall Strength of a Zirconium-based Bulk Metallic Glass”, SEM IX International Congress on Experimental and Applied Mechanics, Society of Experimental Mechanics, Bethel, CT, Paper # 335.
 
Yuan, F., Prakash, V., and Lewandowski, J.J. (2008). “Pressure Effects on the Flow Stress of a Zr-based Bulk Metallic Glass”, SEM IX International Congress on Experimental and Applied Mechanics, Society of Experimental Mechanics, Bethel, CT, Paper # 336.
 
Sunny, G., Yuan, F., Prakash, V., and Lewandowski, J.J. (2008). “High Strain-Rate Compression  in a Zr-based Bulk Metallic Glass”, SEM IX International Congress on Experimental and Applied Mechanics, Society of Experimental Mechanics, Bethel, CT,  Paper # 338.
 
Vormelker, A., Hassan, H.A., Kecskes, L. and Lewandowski, J.J. (2008). “Effects of Changes in Test Temperature on Fracture Toughness of Bulk Metallic Glass/W Composites”, Proceedings  of the 2008 International Conference on Tungsten, Refractory & Hardmetals VII, (A. Bose, R.J. Dowding, and J.A. Shields, Jr., eds.), MPIF, Section 10,  pp. 10-01 – 10-11.
 
Hassan, H.A., El-Shabasy, A.B., and Lewandowski, J.J. (2008). “Fracture and Fatigue Crack Growth of Nano-Composite Aluminum Alloys”, Proceedings  of the 2008 World Congress on Powder Metallurgy & Particulate Materials, MPIF.
 
El-Shabasy, A.B., Hassan, H.A., and Lewandowski, J.J. (2008). “High Cycle Fatigue of  a Nano-structured Composite Produced via Extrusion of Amorphous Al89Gd7Ni3Fe Powders”, Proc.  of the 2008 World Congress on Powder Metallurgy & Particulate Materials, MPIF.
 
Hassan, H.A. and Lewandowski, J.J. (2008). “Summary of Interface Effects on Fracture/Fatigue of Laminated Al Composites”, Proc. 2008 TMS Annual Mtg, New Orleans, LA, pp. 463-470.
 
Sunny, G., Yuan, FP., Prakash, V., and Lewandowski, J.J. (2008). “Effect of High Strain Rates on Peak Stress in a Zr-based Bulk Metallic Glass”, Jrnl Applied Physics, 104(9), 093522.
 
2007
 
Sunny, G., Lewandowski, J.J., and Prakash, V. (2007). "Effects of Annealing and Specimen Geometry on Dynamic Compression of a Zr-based Bulk Metallic Glass”,  Journal of Materials Research, 22(2), pp. 389-401.
 
Yuan, F.P., Prakash, V. and Lewandowski, J.J. (2007). “Spall Strength and Hugoniot Elastic Limit of a Zr-based BMG under Planar Shock Compression”, Jrnl Matl’s Research, 22(2), pp. 402-411.
 
Yuan, F., Sunny, G., Prakash, V., and Lewandowski, J. J.,  (2007).  “Shock response of a Zr-based bulk metallic glass”. Key-note lecture,  and in Proceedings of the 13th International Symposium on Plasticity and its applications, Plasticity 2007, Girdwood, Alaska.
 
Tang, X., Prakash, V., Lewandowski, J.J., Kooistra, G.W., and Wadley, H.N.G. (2007). "Inertial Stabilization of Buckling at High Rates of Loading and Low Test Temperatures: Implications for Dynamic Crush Resistance of Aluminum Alloy-based Sandwich Plates with Lattice Core”,  Acta Materialia , 55(8), pp. 2829-2840.
 
Zhang, Y., Stelmashenko, N.A., Barber, Z.H., Wang, W.H., Lewandowski, J.J. and Greer, A.L. (2007). “Local Temperature Rises During Mechanical Testing of Metallic Glasses”, Journal of Materials Research, 22(2), pp. 419-427.
 
Li, M., Eckert, J., Kecskes, L., and Lewandowski, J.J. (2007). “Mechanical Behavior of  Metallic Glasses and Applications”, Journal of Materials Research, 22(2), pp. 255-257.
 
Yavari, R., Lewandowski, J.J. and Eckert, J.(2007).  “Mechanical Properties of Bulk Metallic Glasses”,  MRS Bulletin, 32(8), pp. 635-638, 2007.
 
Delgado, I.R., Steinetz, B.M., Rimnac, C.M., and Lewandowski, J.J. (2007). “Fatigue Crack Growth Behavior Evaluation of Grainex Mar-M 247 for NASA’s High Temperature, High Speed Turbine Seal Test Rig”, Proceedings of ASME Turbo Expo 2007, 5, pp. 583-597.
 
Lewandowski, J.J., Prakash, V., and Payer, J.H. (2007). “Bulk Metallic Glass: A Wonder Material with Many Potential Applications”, CWRU–The Value of Research – Number 4, p. 34.
 
Lee, K., Warden, K.E., Vatamanu, O.L., Hernandez, C.J., Rimnac, C.M., and Lewandowski, J.J. (2007). “Microdamage Assessment in Equine Bone Resulting from High Hydrostatic Pressure and/or Irradiation”,  Proceedings of Society for Experimental Mechanics, (SEM), Society of Experimental Mechanics, Bethel, CT, (s.7).
 
Sunny, G., Prakash, V., Shamimi Nouri, A., and Lewandowski, J.J. (2007). “Quasi-static and High Strain Rate Compression Behavior of an Fe-based BMG”, Proceedings of International Symposium on Fe-based Bulk Metallic Glasses, (J. Farmer, et al eds), TMS, Warrendale, PA.
 
Shamimi Nouri, A. and Lewandowski, J.J. (2007). “Thermal Exposure Effects on Mechanical Behavior of Iron-based Metallic Glass”, Proceedings of International Symposium on Fe-based Bulk Metallic Glasses, (J. Farmer, et al eds), TMS, Warrendale, PA.
 
Hassan, H.A. and Lewandowski, J.J. (2007). “Effects of High Temperature and Thermal Exposure on Fatigue Crack Propagation of Laminated Metal Composites (LMCs)”
 
Materials Science and Technology, 23(12), pp. 1505-1512.
 
Farmer, J.C., J-S. Choi, Haslam, J.J., Day, S.D., Yang, N.,  Headley, T. Lucadamo, G.,  Yio, J.L., Chames, J., Gardea, A., Clift, M., Blue, C.G., Peters, W., Rivard, J.D.K., Harper, D.C., Swank, D., Bayles, R.,  Lemieux, E.J., Brown, R., Wolejsza, T.M., Aprigliano, L.F., Branagan, D.J., Marshall, M.C., Meacham, B.E., Lavernia, E.J., Schoenung, J., Ajdelsztajn, L., Dannenberg, J., Graeve, O.A., Lewandowski, J.J., Perepezko, J.H., Hildal, K., Kaufman, L., Boudreau, J. (2007). “HPCRM Annual Report: High-Performance Corrosion-Resistant Fe-Based Amorphous Metal Coatings” UCRL-TR-234800-Lawrence Livermore Natl Lab, Livermore, CA, Sept. 20, 2007
 
2006
 
Lewandowski, J.J., Shazly, M. and Nouri, A.S. (2006). “Intrinsic and Extrinsic Toughness of Bulk Metallic Glasses”, Scripta Materialia, Metallic Glasses Viewpoint Set, 54(3), pp. 337-341.
 
Lewandowski, J.J. and Greer, A.L. (2006). “Temperature Rise at Shear Bands in Metallic Glasses”, Nature Materials, 5, pp. 15-18.
 
Sunny, G.,  Prakash, V., and Lewandowski,  J.J. (2006).  “Results from a Novel Insert Design for High Strain-Rate Compression of a Bulk Metallic Glass’, Proceedings of American Society of Mechanical Engineers, (Paper: IMECE-2006-15414), Chicago, IL, Nov. 5-10, 2006.
 
Sunny, G., Lewandowski, J.J., and Prakash, V. (2006).  “Dynamic Compression of Amorphous and Annealed Bulk Metallic Glass’, Proceedings of Society for Experimental Mechanics, (Paper: 349), St. Louis, MO, June  4-7, 2006.
 
Vormelker, A., Shazly, M., Kecskes, L. and Lewandowski, J.J. (2006).  “Effects of Changes in Temperature/Loading Rate on Toughness of BMG-W Composites”, Proc. Sixth Intl Conf on W, Refractory & Hardmetals, (A. Bose, R.J. Dowding, eds.), MPIF, Princeton, NJ, pp. 226-233.
 
Srivatsan, T.S. and Lewandowski, J.J. (2006). “MMCs: Types, Reinforcement, Processing, Properties and Applications”, Advanced Structural Matl’s – Properties, Design Optimization and Application, W.O Soboyejo and T.S. Srivatsan, eds., CRC Press, Boca Raton, FLA, pp. 275-357.
 
Withers, P.J. and Lewandowski, J.J. (2006). “Three-dimensional Imaging of Materials by Microtomography”, Materials Science and Technology, 22,  pp. 1009-1010.
 
Xi, X.K., Zhao, D.Q., Pan, M.X., Wang, W.H., Wu, Y., and Lewandowski, J.J., (2006). “Periodic Corrugation on Dynamic Fracture Surface in Brittle Bulk Metallic Glass”, Applied Physics Letters, 89, 181911.
 
2005
 
Lewandowski, J.J., Wang, W.H., and Greer, A.L, (2005). “Intrinsic Plasticity or Brittleness of Metallic Glasses”, Philosophical Magazine Letters, 85(2). pp.77-89.
 
Xi, X.K., Zhao, D.Q., Pan, M.X., Wang, W.H., Wu, Y., and Lewandowski, J.J. (2005). “Fracture of Brittle Metallic Glasses:Brittleness or Plasticity”, Phys. Rev. Lett, 94, pp.125510-1–125510-4.
 
Wang, W.H., Lewandowski, J.J., and Greer, A.L. (2005). “Understanding Glass Forming Ability of Cu50Zr50 Alloys in Terms of Metastable Eutectic”, Jrnl Matl’s Research, 20(9), pp. 2307-2312.
 
Lewandowski, J.J. and Greer, A.L. (2005). “Temperature Rise at Shear Bands in Metallic Glasses”, Nature Materials, published online 12/18/05; doi:10,1038/nmat1536.
 
Lee, K. and Lewandowski, J.J. (2005). “Effects of Microstructural Characteristics on the Mechanical Properties of Open-Cell Nickel Foams”, Matl’s Sci. & Tech., 21(11), pp. 1355-1359.
 
Lewandowski, J.J. and Awadallah, A. (2005). “Hydrostatic Extrusion of Metals and Alloys”, ASM Metals Handbook,  ASM International, Materials Park, OH, Vol. 14A, pp. 440-447.
 
Awadallah, A. and Lewandowski, J.J. (2005). “Forging of DRA Composites”, ASM Metals Handbook, ASM International, Materials Park, OH, Vol. 14A, pp. 366-373.
 
Sunny, G., Lewandowski, J.J., and Prakash, V. (2005).  “Effects of Annealing on Dynamic Behavior of a Bulk Metallic Glass’, Proceedings of American Society of Mechanical Engineers – Applied Mechanics Division, (Paper: IMECE-2005-83016), 256, pp. 131-137.
 
Sunny, G., Yuan, F., Lewandowsk, J.J., and Prakash, V. (2005).  “Effects of Specimen Geometry on High Strain-Rate Behavior of Bulk Metallic Glass’, Proceedings of Society Exptal Mechanics (SEM), Society of Experimental Mechanics, (Paper 324), Portland, OR, June 7-9, 2005. 
 
Tang, X., Prakash, V., and Lewandowski, J.J. (2005). "Dynamic Deformation of Aluminum 6061 in Two Different Heat Treatments",  Proceedings of Society for Experimental Mechanics (SEM), Society of Experimental Mechanics, Bethel, CT, (s.7), pp. 323-330. 
 
2004
 
Hassan, H., Lewandowski, J.J., and Abd Latif, M.H. (2004). "Effects of Lamination and Changes in Layer Thickness on Fatigue Crack Propagation of Lightweight Laminated Metal Composites", Metallurgical and Materials Transactions A , 35A, pp. 45-52.
 
Hassan, H., Lewandowski, J.J., and Abd Latif, M.H. (2004). "Effects of Changes in Test Temperature on Fatigue Crack Propagation of Al6090SiCp-Al6013 Laminated Metal Composites", Metallurgical and Materials Transactions A , 35A, pp.2291-2303.
 
Hassan, H., Lewandowski, J.J., and Abd Latif, M.H. (2004). "Effects of Changes in Test Temperature on Fatigue Crack Growth of Adhesively Bonded Al2080/SiC/20p-2080Al Laminated Metal Composites", Journal of Materials Science, 39, pp.3063-3067.
 
Padhi, D. and Lewandowski, J.J. (2004). “Resistance Curve Behavior of Polycrystalline Niobium Failing Via Cleavage”,  Materials Science and Engineering A, A366, pp.56-65.
 
El Shabasy, A., and Lewandowski, J.J. (2004). "Effects of  Load Ratio, R,  and Test Temperature on Fatigue Crack Growth in Fully Pearlitic Eutectoid Steel", Int’l Jrnl Fatigue, 26, pp. 305-309.
 
Wesseling, P., Nieh, T.G., Wang, W.H., and Lewandowski, J.J. (2004).  “Preliminary Assessment of Flow, Notch Toughness, and High Temperature Behavior of Cu60Zr20Hf10Ti10 Bulk Metallic Glass”, Scripta Mater., 51, pp.151-154.
 
2003
 
Larose, J., and Lewandowski, J.J. (2003). "Effects of Processing Conditions and Test Temperature on Fatigue Crack Growth and Fracture Toughness of Be-Al Alloys", Mater. Sci. and Eng.  A, 344(1-2), pp. 215-228.
 
Bewlay, B.P., Jackson, M.R., Zhao J.C., Subramanian, P.R., Mendiratta, M.G., Lewandowski, J.J. (2003) “Ultrahigh Temperature Nb-Silicide Composites”, MRS Bulletin, 28(9), pp. 646-653.
 
Padhi, D. and Lewandowski, J.J. (2003). "Effects of Changes in Grain Size and Temperature on the Dynamic Fracture and Impact Toughness of Nb", Metallurgical and Materials Transactions A, 34A(4), pp. 1-12.
 
Wesseling, P., Ko, B.C., and Lewandowski, J.J. (2003). "Quantitative Evaluation of Alpha Aluminum Nano-particles in Amorphous Al87Ni7Gd7 - Comparison of XRD, DSC, AND TEM" Scripta Metall et Materialia, 48(11), pp. 1537-1541.
 
Lewandowski, J.J., Wesseling, P., Prabhu, N.S., Larose, J., and Lerch, B.A. (2003). "Strength Differential Measurements in IN 718 – Effects of Superimposed Pressure", Metall and Materials Transactions A, 34A, pp. 1736-1739.
 
Wesseling, P.  Lowhahphandu, P.,  and Lewandowski, J.J. (2003). "Effects of Superimposed Pressure on Flow and Fracture of Two Bulk Amorphous Metals", in MRS Symposium Proceedings - Volume 754, Supercooled Liquids, Glass Transition, and Bulk Metallic Glasses, (T. Egami, A.L. Greer, A. Inoue, and S. Ranganathan, eds.), MRS, Warrendale, PA, pp.275-280.
 
Wesseling, P., Lowhaphandu, P. and Lewandowski, J.J. (2003). “Hardness Indentation Studies on Metallic Glasses", in MRS Symposium Proceedings - Volume 754, Supercooled Liquids, Glass Transition, and Bulk Metallic Glasses, (A.L. Greer, T. Egami, A. Inoue, and S. Ranganathan, eds.), MRS, Warrendale, PA, pp. 281-286.
 
Lewandowski, JJ, Thurston, AK, and Lowhaphandu, P. (2003) "Fracture Toughness of Amorphous Metals and Composites", in MRS Symposium Proceedings - Volume 754, Supercooled Liquids, Glass Transition, and Bulk Metallic Glasses, (A.L. Greer, T. Egami, A. Inoue, and S. Ranganathan, eds.), MRS, Warrendale, PA, pp. 307-313.
 
Wesseling, P., Ko, B.C., Vatamanu, L.O., Caris, J.B., and Lewandowski, J.J. (2003). "Effects of Annealing and Annealing with Pressure on Devitrification of Al87Ni7Gd7", in MRS Symposium Proceedings - Volume 754, Supercooled Liquids, Glass Transition, and Bulk Metallic Glasses, (A.L. Greer, T. Egami, A. Inoue, and S. Ranganathan, eds.), MRS, Warrendale, PA, pp.365-370.
 
Lewandowski, J.J. (2003). “Fracture and Fatigue of Nb Alloys and Composites”, Proc. Of International Conference on Nb Alloys for High Temperature Applications, (YW Kim and T Carneiro, eds.), TMS, Warrendale, PA, pp. 75-89.
 
Awadallah, A., Ellis, D., Michal, G.M., Lewandowski, J.J. (2003). “Formability of a High Temperature Cu Composite”, in Affordable MMCs for High Performance Applications, (A.W. Pandey, K.L. Kendig, J.J. Lewandowski, and S.R. Shah, eds.), TMS, Warrendale, PA.
 
2002
 
Lewandowski, J.J. , and Lowhaphandu, P. (2002). "Pressure Effects on Flow and Fracture of a Bulk Amorphous Zr-Ti-Ni-Cu-Be Alloy", Philosophical Magazine A, 82(17), pp. 3427-3441.
 
Larose, J., and Lewandowski, J.J. (2002). "Pressure Effects on Flow and Fracture of Be-Al Composites", Metall and Materials Transactions A, 33A, pp. 3555-3564.
 
Taleff, E.M., Lewandowski, J.J., and Pourlodian, B. (2002). “Microstructure Property Relationships in Pearlitic Eutectoid and Hypereutectoid Steels”, JOM, 54(7), July 2002,pp.25-30.
 
Awadallah, A., Prabhu, N.S., and Lewandowski, J.J. (2002). "Forging/Forming Simulation Studies on a Unique, High Capacity Deformation Simulator Apparatus", Materials and Manufacturing Processes, 17(6), pp. 737-763.
 
Ko, B.C., Wesseling, P., Vatamanu, L.O., Shiflet, G.S., and Lewandowski, J.J. (2002). "Effects of Annealing and Annealing at High Pressure on Structure and Mechanical Properties of Al87Ni7Gd6 Metallic Glass", Intermetallics, 10, pp. 1099-1103.
 
Soboyejo, WO, Lewandowski, JJ, and Ritchie, RO (2002). Mechanisms and Mechanics of Fracture - The JF Knott Symposium, TMS, Warrendale, PA.
 
2001
 
Lewandowski, J.J. (2001). "Effects of Annealing and Changes in Stress State on Flow and Fracture of a Bulk Metallic Glass", Materials Transactions–JIM, 42(4), pp. 633-637.
 
Gimple, J.L., Wilkinson, D.S., Embury, J.D., and Lewandowski, J.J. (2001). "Effects of Superimposed Pressure on the Fracture Behavior of Automotive Alloys", in Aluminum 2001: Proceedings of 2001 TMS Automotive Al Alloys and Joining Al Symposium, (S.K. Das, Kaufman, J.G., and Lienert, T.J.eds.), TMS, Warrendale, PA, pp. 17-29.
 
Gimple, J.L., Wilkinson, D.S., Embury, J.D., and Lewandowski, J.J. (2001). “On the Mechanical Behavior of Aluminum Automotive Alloys Under Superimposed Pressure”, in Symposium on Materials in the Automotive Industry – Materials in the Automotive Industry, (E. Essadiqi, F.E. Goodwin, and M. Elboujami, eds.), pp. 397-410.
 
Lewandowski, J.J., Padhi, D., and Solv’yev, S. (2001). "Flow, Fracture, and Fatigue of Refractory Metals and Composites", Third International Conference on Structural Intermetallics – ISSI – III, (K. Hemker and D. Dimiduk, eds.), TMS, Warrnedale, PA, pp. 371-381.
 
Subramanian, K.H., Duncan, A.J., Sindelar, R.L.,  Lewandowski,  J.J., and Tuma,  C.J. (2001). "Fracture Toughness Testing of ASTM A285 Steel for Fracture Analysis of Savannah River Site Storage Sites", Proceedings of the ASME PVP 2001 Conference.
 
2000
 
Lewandowski, J.J. (2000). "Fracture and Fatigue of Particulate MMC’s", in Comprehensive Composite Materials, (A. Kelly and C. Zweben, eds.), Vol. 3 – Metal Matrix Composites (T.W. Clyne, ed.), Elsevier, pp. 151-187.
 
Oviedo, J., Lewandowski, J.J., and Payer, J.H. (2000). "Environment-Assisted Cracking of AISI 305, 410, and Low Alloy Steel ASTM A-325 Bolts/Fasteners in Chloride Containing Solutions", Corrosion  2000, Paper No. 00623, NACE, Houston, Texas.
 
Lewandowski, J.J. (2000). "Microstructural Effects on the Deformation and Fracture of Pearlitic Steels", in Deformation, Processing, and Properties of Structural Materials, (E. Taleff, et al eds.), TMS-AIME, Warrendale, PA, pp. 69-79.
 
Lowhaphandu, P., Ludrosky, L.A., Montgomery, S.L., and Lewandowski, J.J. (2000). "Deformation and Fracture Toughness of a Bulk Amorphous Zr-Ti-Ni-Cu-Be Alloy", Intermetallics, 8, pp. 487-492.
 
Prabhu, N.S. , and Lewandowski, J.J. (2000). "Forgability  Studies on Aluminum Composites", in Powder Metallurgy Aluminum and Light Alloys for Automotive Applications, (W.F. Jandeska, Jr., and R.A. Chernenkoff, eds.). MPIF, Princeton, NJ, pp. 187-203.
 
1999
 
Lowhaphandu, P. and Lewandowski, J.J., (1999). "Effects of Heat Treatment and Cu-Infiltration on the Toughness and Fatigue Crack Growth of Porous Steels", Metall. Trans. A., 30A pp. 325-334
 
Lewandowski, J.J. (1999). "Effects of the Addition of Toughening Ligaments on the Fatigue of Composites", in Fatigue ’99, (X.R. Wu and Z.G. Zhang eds.), EMAS, 1999, Vol. III, pp. 1471-1477.
 
Zinsser, W.A., Soly’vev, S. and Lewandowski, J.J. (1999). "Fracture and Fatigue of Refractory Metal Intermetallic Composites", in Intermetallics VIII Vol. 552, (E. George, M. Yamaguchi, and M. Mills, eds.), MRS, Pittsburgh, PA 1999,pp. KK6.10.1 – KK6.10.8.
 
Lowhaphandu, P., Montgomery, S. L., and Lewandowski, J. J., (1999).  "Effects of Superimposed Hydrostatic Pressure on Flow and Fracture of Zr-Ti-Ni-Cu-Be Bulk Metallic Glass", Scripta Metall. et.Mater., 41,pp. 19-24.
 
1998
 
Zwonitzer, S.A., Rozak, G. and Lewandowski, J.J. (1998). "Effects of Rolling Temperature and Reduction on Microstructure and Tensile Properties of Thick Plate, P/M Mo", in Mo and Mo Alloys, (A. Crowson, J.A Shields, P.R. Subramainan, and E.S. Chen, eds.), TMS-AIME, Warrendale, PA, pp. 111-124.
 
Lewandowski, J.J., Berger, B., Rigney, J.D., and Patankar, S.N., (1998). "Effects of Dislocation Substructure on Strength and Toughness in Polycrystalline NiAl Processed via High Temperature Hydrostatic Extrusion", Philosophical Magazine A, 78 (3), pp. 643-656.
 
Lowhaphandu, P. and Lewandowski, J.J., (1998). "Fracture Toughness and Notch Toughness of Bulk Metallic Glass", Scripta Metall. et Mater., 38, 12, pp. 1811-1817.
 
Lewandowski, J.J. and Zinsser, W., (1998). "Effects of R-ratio on Fatigue Crack Growth of Nb-Si (ss) and Nb-10Si In-situ Composites", Metall. Trans. A., 29A, pp.1749-1757.
 
Zinsser, W. and Lewandowski, J.J. (1998). "Fatigue Crack Growth in Nb-10Si Composites", Scripta Metall. et Mater., 38, 12, pp. 1775-1780.
 
Lewandowski, J.J. and Lowhaphandu P. (1998). "Effects of Hydrostatic Pressure on Mechanical Behavior and Deformation Processing of Materials", International Materials Reviews, 43 (4), pp. 145-188.
 
Lowhaphandu, P., Lewandowski, J.J., Varelidis, P.C., Kominos, N.P., and Papaspyrides, C.D. (1998). “Polyamide coated glass fabric in polyester resin: interlaminar shear strength versus moisture absorption studies”, Composites Part A: Applied Science and Manufacturing (Incorporating Composites and Composites Manufacturing), 29, 12, pp. 1489-1499.
 
1997
 
Zhang, J.J., and Lewandowski, J.J. (1997). "Delamination Study Using Four-Point Bending of Bi-layers", Journal of Materials Science, 32, pp. 3851-3856.
 
Samant, A.,  and Lewandowski,  J.J. (1997). "Effects of Grain Size and Alloy Content on the Cleavage Fracture Stress of Nb", Metall. Trans. A, 28A, pp. 389-399.
 
Osman, T.M.,  Lewandowski, J.J., and Lesuer, D.R. (1997). "The Fracture Resistance of Layered DRA Materials: Influence of Laminate Thickness", Materials Sci. and Eng.,  A229, pp.1-9.
 
Samant, A.,  and Lewandowski, J.J. (1997). "Effects of Test Temperature, Grain Size and Alloy Additions on the Low Temperature Fracture Toughness of Polycrystalline Nb", Metall. Trans. A, 28A, pp. 2297-2307.
 
Bewlay, B.P., Lewandowski, J.J., and Jackson, M.R. (1997). "Refractory Metal Intermetallic In-Situ Composites for Aircraft Engines", JOM, August, pp. 44-47.
 
Lonsdale, C.P.,  and Lewandowski, J.J. (1997). "Fracture Toughness Testing of A.R.E.A. Grade B Hand Tool Steel", American Railway Engineering Association Bulletin, Vol. 93, pp. 83-89.
 
1996
 
Wu, M., Zhang, J.J., Lewandowski, J.J., Hunt, W.H., and Lavernia, E.J. (1996)."Layered Al/SiC Metal Matrix Composite Processed Using Spray Atomization and Deposition",  in   Processing and Fabrication of Advanced Materials IV, (T.S. Srivatsan and J.J. Moore, eds.),  TMS-AIME, Warrendale, PA, pp. 441-457.
 
Rigney, J.D., and Lewandowski, J.J. (1996). "Loading Rate and Test Temperature Effects on Fracture of Nb5Si3/Nb In-situ Composites", Metall. Trans. A., 27A, pp. 3292-3306.
 
Vaidya, A., and Lewandowski, J.J. (1996). "Effects of Reinforcement Size and Volume Fraction on High Cycle Fatigue of AZ91D Composites", Materials Sci. and Eng., A220, pp. 85-92.
 
Osman, T.M., Lewandowski, J.J., Hunt, W.H., and Leseur, D.R. (1996)."Structure-Property Relationships for Layered DRA Materials", International Conference on Inorganic Matrix Composites, (M.K. Surappa, ed.), TMS-AIME, Warrendale, PA, pp. 155-165.
 
Singh, P.M., and Lewandowski, J.J. (1996). "Effects of Heat Treatment on SCC of 2XXX Composites", Journal of  Materials Science Letters, 15, pp. 490-493.
 
Lewandowski, J.J., and Singh, P.M. (1996). "Fracture and Fatigue of DRA Composites", Metals Handbook-Volume 19, pp. 895-904.
 
Ellis, L.Y., Lewandowski, J.J., and Hunt, W.H., Jr. (1996). "Fracture of Toughened DRA", in  Layered Materials for Structural Applications, MRS Proceedings, Vol. 434, (J.J. Lewandowski, C.H. Ward, M.R. Jackson, and W.H. Hunt, Jr., eds.), MRS, Pittsburgh, PA, pp.213-219.
 
Weaver, M.L., Noebe, R.D., Lewandowski, J.J., Oliver, B.F., and Kaufman, M.J. (1996). "Observations of Static Strain-Aging in Polycrystalline NiAl", Intermetallics, 4, pp. 533-542.
 
Osman, T.M., and Lewandowski, J.J. (1996). "Flow and Fracture of Bi-material Systems Based on Aluminum Alloys", Metall. Trans. A, 27A, pp. 3937-3947.
 
Lesuer, D.R., Wadsworth, J., Riddle, R.A., Syn, C.K., Lewandowski, J.J., and Hunt, W.H. (1996). "Laminated Metal Composites-Fracture Toughness and Impact Properties", in Layered Materials for Structural Applications, MRS Proceedings, Vol. 434, (J.J. Lewandowski, C.H. Ward, M.R. Jackson, and W.H. Hunt, Jr., eds.), MRS, Pittsburgh, PA, pp. 205-213.
 
Osman, T.M., and Lewandowski, J.J. (1996). "Enhanced Fracture Resistance in Layered Discontinuously Reinforced Aluminum", Materials Sci. and Tech., 12, pp.1001-1006.
 
Wu, M., Zhang, J., Hunt, W.H., Lewandowski, J.J., and Lavernia, E.J. (1996). "Enhanced Fracture Toughness of a Layered 6061/SiCp DRA Material Produced by Spray Deposition", Jnl. Materials Synthesis and Processing, 4, pp. 127-134.
 
Hilinski, E., Lewandowski, J.J., and Wang, P.T. (1996). “Densification and Flow Stress Evolution Model for Powder Based DRA”, in Al and Mg for Automotive Applications, (J.D. Bryant, ed.), TMS-AIME, Warrendale, PA, pp. 189-207.
 
Lesuer, D.R., Syn, C.K., Sherby, O.D., Wadsworth, J., Lewandowski, J.J., and Hunt, W.H. (1996)."Mechanical Behavior of Laminated Metal Composites", International Materials Reviews, 41, pp. 169-197.
 
1995
 
Kajuch, J., Short, J.W., and Lewandowski, J.J. (1995). "Effects of Constraint and Test Temperature on Toughness of Nb5Si3/Nb Laminates", Acta Metall. et Mater., 43, pp. 1955-1967.
 
Mendiratta, M.G., Goetz, R., Dimiduk, D.M., and Lewandowski, J.J. (1995). "Unconstrained and Constrained Tensile Flow and Fracture Behavior of an Nb-1.24 at. Pct. Si Alloy", Metall. Trans. A, 26A, pp. 1767-1777.
 
Rigney, J.D., and Lewandowski, J.J. (1995). "Effects of Loading Rate and Test Temperature on the Toughness of In-situ Composites Based on Niobium Silicides", in Fatigue and Fracture of Ordered Intermetallic Materials II, (T.S. Srivatsan, W.O. Soboyejo, and R.O. Ritchie, eds.), TMS, Warrendale, PA, pp. 339-359.
 
Klar, E., Berry, D.F., Samal, P.K., Lewandowski, J.J., and Rigney, J.D. (1995). "Fracture Toughness and Fatigue Crack Growth Response of Copper Infiltrated Steels", International Journal Powder Metallurgy, 31/4, pp. 317-325.
 
Vaidya, A., and Lewandowski, J.J. (1995). "Effects of Confining Pressure on Ductility of Monolithic Metals and Composites", in Intrinsic and Extrinsic Fracture Mechanisms in Inorganic Composites, (J.J. Lewandowski and W.H. Hunt, Jr., eds.), TMS, Warrendale, PA, pp. 147-157.
 
Singh, P.M., and Lewandowski, J.J. (1995). "Damage Evolution in DRA Materials", in Intrinsic and Extrinsic Fracture Mechanisms in Inorganic Composites, (J.J. Lewandowski and W.H. Hunt, Jr., eds.), TMS, Warrendale, PA, pp. 57-69.
 
Lewandowski, J.J., and Singh, P.M. (1995). "Toughness of DRA and DRA/Aluminum Alloy Laminates", in Intrinsic and Extrinsic Fracture Mechanisms in Inorganic Composites, (J.J. Lewandowski and W.H. Hunt, Jr., eds.), TMS, Warrendale, PA, pp. 129-147.
 
Lowhaphandu, P., Lewandowski, J.J., and Rigney, J.D. (1995). "Extrinsic Toughening of Porous Steels", in Intrinsic and Extrinsic Fracture Mechanisms in Inorganic Composites, (J.J. Lewandowski and W.H. Hunt, Jr., eds.), TMS, Warrendale, PA, pp. 123-129.
 
Osman, T.M., Lewandowski, J.J., Hunt, W.H., Leseur, D., Syn, C., and Riddle, R. (1995). "Toughness of DRA/Aluminum Alloy Laminates", in Intrinsic and Extrinsic Fracture Mechanisms in Inorganic Composites, (J.J. Lewandowski and W.H. Hunt, Jr., eds.), TMS, Warrendale, PA, pp. 103-113.
 
Weaver, M.L., Noebe, R.D., Lewandowski, J.J., Oliver, B.F., and Kaufman, M.J. (1995). "The Effects of Interstitial Content, Heat Treatment, and Prestrain on the Tensile Properties of NiAl", Matl’s Sci. And Eng., A192/193, pp. 179-185.
 
Grow, A.L. and Lewandowski, J.J. (1995). "Effects of Reinforcement Size on Hydrostatic Extrusion of MMCs", SAE Transactions, Paper #950260.
 
Singh, P.M., and Lewandowski, J.J. (1995). "Effects of Heat Treatment on SCC of DRA 7xxx Alloy During Slow Strain Rate Testing", Scripta Metall. et Mater.,33, pp. 1393-1399.
 
Singh, P.M., and Lewandowski, J.J. (1995). "Effects of Heat Treatment and Reinforcement on Evolution of Poisson Ratio During Straining of DRA", Met. Trans. A, 26A, pp.2911-2921.
 
Osman, T.M., Lewandowski, J.J., Lesuer, D.R., and Hunt, W.H. (1995). "Deformation and Fracture Processes in DRA Laminates", in Micromechanics of Advanced Materials, (S.M. Chu, et al., eds.), TMS-AIME, Warrendale, PA, pp. 135-144.
 
1994
 
Osman, T.M., and Lewandowski, J.J. (1994). "Advances in Discontinuously Reinforced Metal Composites: The Case School of Engineering, CWRU", Advanced Composites Newsletter, vol. 3, no. 2, pp. 1-8.
 
Ellis, L. Y., and Lewandowski, J. J. (1994). "Effects of Layer Thickness on the Impact Toughness of Laminated Composites", Materials Sci. and Eng., A183, pp. 59-67.
 
Rigney, J. D., Lewandowski, J. J., and Patankar, S. (1994). "Properties of Monolithic and Composite NiAl Processed via Hydrostatic Extrusion and Vacuum Hot Pressing", Composites Science and Technology, 52, pp. 163-172.
 
Osman, T.M., Lewandowski, J.J., and Hunt, W.H. (1994). "Laminated Al Composites with Improved Properties", in Fourth Int’l Conf. on Al Alloys - Their Physical and Mechanical Properties, (T.H. Sanders, Jr. and E.A. Starke, Jr., eds.), Vol. 2, GA Tech, GA, pp. 706-713.
 
Zhang, J., and Lewandowski, J. J. (1994). "An Indentation Technique to Evaluate Interface Toughness of Laminates", Journal of Materials Science, 29, pp. 4022-4026.
 
Margevicius, R.W., and Lewandowski, J.J. (1994). "Effects of Pressure on Ductility and Fracture of NiAl", Met. Trans. A, 24A, pp. 1457-1470.
 
Lewandowski, J. J. (1994). "Mechanical Behavior of In-situ Composites", in In-situ Composites: Science and Technology, (M. Singh and ,D. Lewis, eds.), TMS, Warrendale, PA, pp. 159-167.
 
Patankar, S.N., Grow, A.L., Margevicius, R.W., and Lewandowski, J. J., (1994).  "Hydrostatic Extrusion of 2014 and 6061 Composites", in Processing and Fabrication of Advanced Materials III, (V. A. Ravi, T. S. Srivatsan, and J. J. Moore, eds.) TMS, Warrendale, PA, pp. 733-745.
 
Short, J. W., Kajuch, J., and Lewandowski, J. J. (1994).  "Processing and Properties of Nb5Si3/Nb Laminates", in Proc. MRS Symposium - Intermetallic Matrix Composites III, (J. A. Graves, R. R. Bowman, and J. J. Lewandowski, eds.), MRS, Pittsburgh, PA, pp. 285-293.
 
Hilinski, E. J., Lewandowski, J. J., Rodjom, T. J., and Wang, P. T. (1994).  "Flow Behavior and Stress Evolution Modelling for Discontinuously Reinforced Composites", in 1994 World P/M Congress., Vol. 7, (C. Lall and A. Neupaver, eds.) MPIF, Princeton, NJ, pp. 119-131.
 
Hilinski, E. J., Lewandowski, J. J., Rodjom, T. J. and Wang, P. T. (1994). "Development of a Densification Model for DRA Composites", in 1994 World P/M Congress., Vol. 7, (C. Lall and A. Neupaver, eds.), MPIF, Princeton, NJ, pp. 83-93.
 
Osman, T.M., Lewandowski, J.J., and Hunt, W.H., (1994). "Advances in PM and Particulate Materials", in 1994 World Powder Metallurgy Conf. Proc., (C. Lall and A. Neupaver, eds.), vol. 5, MPIF, Princeton, NJ, pp. 351-364.
 
Osman, T. M., and Lewandowski, J. J. (1994). "Influence of Thickness in the Fracture Resistance of Conventional and Laminated DRA Materials", Scripta Metall. et Mater., 31, pp. 191-195.
 
Osman, T. M., Singh, P. M., and Lewandowski, J. J. (1994). "Crack Bridging in a Laminated Metal Matrix Composite", Scripta Metall. et Mater., pp. 607-612.
 
Maloy, S.A., Mitchell, T.E., Petrovic, J.J., Heuer, A.H., and Lewandowski, J.J. (1994). "The Temperature and Strain Rate Dependence of the Flow Stress in MoSi2 Single Crystals", in MRS Proceedings - Vol. 322, MRS, Pittsburgh, PA, pp. 21-26.
 
Rigney, J.D., Singh, P.M., and Lewandowski, J.J. (1994). “Effects of Environmental Exposure on Ductile-Phase Toughening in Niobium Silicide-Niobium Composites”, in MRS Proceedings-Vol. 322, MRS, Pittsburgh, PA, pp. 503-509.
 
1993
 
Liu, D. S., and Lewandowski, J. J. (1993). "Effects of Superimposed Hydrostatic Pressure on Deformation and Fracture:  Part I 6061 Monolithic Material", Met. Trans. A, 24A, pp. 601-609.
 
Liu, D. S., and  Lewandowski, J.J. (1993). "The Effects of Superimposed Hydrostatic  Pressure on Deformation and Fracture:  Part II 6061 Particulate Composites", Met. Trans. A, 24A, pp. 609-617.
 
Singh, P. M., and Lewandowski, J.J. (1993). "Effects of Heat Treatment and Particle Size on Damage Accumulation During Tension Testing of Al/SiC Metal Matrix Composites", Met. Trans. A, 24A, pp. 2451-2464.
 
Margevicius, R. W., and Lewandowski, J. J. (1993).  "Pressure-Induced Dislocation Generation and Subsequent Flow in NiAl", Acta Metall. et Mater., 41, pp. 485-496.
 
Hong, S. I., Gray, G. T., and Lewandowski, J. J. (1993). "Dynamic Deformation Behavior of Al-Zn-Mg-Cu Alloy Matrix Composites Reinforced with 20 vol% SiC", Acta Metall. et Mater., 41, pp. 2337-2351.
 
Rozak, G.A., Lewandowski, J.J., and Wallace, J.F. (1993). "Effects of Processing Conditions on Properties of AZ91 Mg-SiC Composites", SAE Transactions, Paper No. 930180.
 
Grow, A.L., Margevicius, R.W., and Lewandowski, J.J., (1993). "Effects of Crystal Orientation, Deformation, and Fracture on Acoustic Contrast in NiAl",Scripta Metall Mater., 28, pp. 575-580.
 
Maloy, S.A., Mitchell, T.E., Lewandowski, J.J., and Heuer, A.H. (1993).  "Dislocation Reactions in MoSi2", Philos. Mag. Letters, 67, pp. 313-321.
 
Liu, C., Michal, G. M., and Lewandowski, J. J. (1993).  "Residual Stresses in Aluminum Based Composites", Proc. of Conference on Residual Stresses, (E.V. Barerra, M. Gungor, and S. Fishman, eds.), TMS-AIME, Warrendale, PA, pp. 239-257.
 
Margevicius, R. W., and Lewandowski, J. J., Locci, I. and Noebe, R.D. (1993). "Yield Point Behavior in NiAl", Scripta Metall. et Mater., 29, pp. 1309-1312.
 
Margevicius, R.W., Lewandowski, J.J., Michal, G. M., and Locci, I. (1993). "Effects of Pressure on Flow and Fracture of NiAl", in Proc. Symposium on Matl’s Research, (J. D. Whittenberger, M.H. Yoo, R. Darolia, and I. Baker, eds.), MRS, Pittsburgh, PA, Vol. 288, pp. 555-560.
 
Patankar, S., and Lewandowski, J. J. (1993). "Processing and High Temperature Properties of MoSi2", in Proc. Symposium on Materials Research, (J. D. Whittenberger, M. H. Yoo, R. Darolia, and I. Baker, eds.), MRS, Pittsburgh, PA, Vol. 288, pp. 829-834.
 
Kajuch, J., Rigney, J. D., and Lewandowski, J. J. (1993). "The Kinetics of Formation of Nb5Si3", in Proc. Symposium on Materials Research, (J. D. Whittenberger, M. H. Yoo, R. Darolia, and I Baker, eds.), MRS, Pittsburgh, PA, Vol. 288, pp. 853-860.
 
Hunt, W. H., Osman, T., and Lewandowski, J. J. (1993). "Structure-Property Relations in Discontinuously Reinforced Aluminum (DRA) Alloys", JOM, January 1993, pp. 30-35.
 
Patankar, S., Xiao, S.Q., Lewandowski, J.J., and Heuer, A.H. (1993). "Mechanism of Mechanical Alloying in MoSi2", Journal of Materials Research, 8, pp. 1311-1316.
 
Manoharan, M., Lewandowski, J.J., and Hunt, W.H. Jr. (1993). "Fracture Characteristics of an Al-Si-Mg Model Composite System", Materials Sci. and Eng., A172, pp.63-69.
 
Rigney, J.D., Castro, R., and Lewandowski, J.J. (1993). "In-situ Fracture Monitoring of Ductile-Phase Toughened MoSi2-Ta Composites", Journal of Materials Science, 28, pp. 4023-4027.
 
Rigney, J.D., and Lewandowski, J.J.(1993). "Chemical Stability of TiB2 Reinforcement in Nickel Aluminide Matrices", Journal of Materials Science, 28, pp. 3911-3922.
 
Hardwick, D., Martin, P., Patankar, S., and Lewandowski, J. J. (1993). "Effects of Processing on Properties of MoSi2", ISSI-I, (R. Darolia, et al, eds.), TMS-AIME, Warrendale, PA, pp. 665-674.
 
Margevicius, R. W., Lewandowski, J. J., and Locci, I. (1993).  "Effects of Pressure on Flow and Fracture of NiAl", ISSI-I, (R. Darolia, et al, eds.), TMS-AIME, Warrendale, PA, pp. 577-584.
 
Singh, P. M., and Lewandowski, J. J. (1993).  "The Effects of Elastic and Plastic Deformation on the Poisson Ratio of a MMC", Scripta Metall. et Mater., 29, pp. 199-204.
 
Margevicius, R. W., and Lewandowski, J. J. (1993).  "Deformation Texture of Hydrostatically Extruded Polycrystalline NiAl", Scripta Metall. et Mater., 29, pp. 1651-1654.
 
Klar, E., Berry, D., Samal, P., Lewandowski, J.J., and Rigney, J.D. (1993). "Copper Infiltrated P/M Steels", in 1993 P/M World Congress, (Y. Bando and K. Kosuge, eds.), Japan Society of Powder and P/M, Kyoto, Japan, pp. 987-990.
 
1992
 
Luo, H., Ballarini, R., and Lewandowski, J.J. (1992).  "Effects of Hydrostatic Stress on Elastoplastic Behavior of Two-Phase Composites", Jrnl Composite Matl’s, 26, 13,pp.1945-1967.
 
Rigney, J.D., and Lewandowski, J.J. (1992). "Fracture Toughness of Monolithic Nickel Aluminides", Materials Sci. and Eng., A149, pp. 143-151.
 
Lewandowski, J.J., Kim, Y.S., and Holroyd, N.J.H. (1992). "Pb-Induced Solid Metal Embrittlement of Al-Mg-Si Alloys at -4 C to 80 C", Met. Trans. A, 23A, pp. 1679-1689.
 
Manoharan, M., and Lewandowski, J.J. (1992). "Effect of Reinforcement Size and Matrix Microstructure on the Fracture Properties of an Aluminum Metal-Matrix Composite", Materials Sci. and Eng., A150, pp. 179-186.
 
Rozak, G., Lewandowski, J.J., Wallace, J.F., and Altmisoglu, A. (1992). "Effects of Casting Conditions and Deformation Processing on A356 Aluminum and A356-20% SiC Compos­ites", Journal of Composite Materials, 26, 14, pp. 2076-2106.
 
Rigney, J. D., Singh, P.M., and Lewandowski, J. J. (1992).  "Environmental Effects on Ductile Phase Toughening in Nb5Si3-Nb Composites", JOM, August, 1992, pp. 36-41.
 
Lewandowski, J. J., Singh, P. M., and Holroyd, N. J. H. (1992). "Modelling of Impurity Induced Sustained Load Cracking in Aluminum Alloys", Jaffee Symposium on Clean Materials Technology, (R. Viswanathan, ed.), ASM Int’l., Materials Park, OH, pp. 29-39.
 
Rigney, J.D., and Lewandowski, J.J. (1992). "Effects of Reinforcement Size and Distribution on Fracture Toughness of Composite Nickel Aluminide Intermetallics", Materials Sci. and Eng., A158, pp. 31-45.
 
Kajuch, J., Rigney, J.D., and Lewandowski, J.J. (1992). "Processing and Properties of Toughened Silicides" Materials Sci. and Eng., A155, pp. 59-65.
 
Maloy, S.A., Lewandowski, J.J., Heuer, A.H., and Petrovic, J.J. (1992). "Effects of Carbon Additions on High Temperature Mechanical Properties of Molybdenum Disilicide", Materials Sci. and Eng., A155, pp. 159-163.
 
Singh, P.M., Holroyd,N.J.H.H., Lewandowski, J.J., and Evans, J.T. (1992). "Monte-Carlo Simulation of Lead Induced Slow Crack Growth in Al-Mg-Si Alloys", in Parkins Symposium on Fundamental Aspects of SCC, (S.R. Bruemmer, et al. Eds.), TMS-AIME, Warrendale, PA, pp. 567-583.
 
Margevicius, R. W., Lewandowski, J. J., and Locci, I. (1992).  "The Decrease in Yield Strength in NiAl Due to Hydrostatic Pressure, Scripta Metall. et Mater., 26, pp. 1733-1736.
 
Hong, S. I., Gray, G. T., and Lewandowski, J. J. (1992).  "Shock Loading Experiments on Al-Alloy Composites", Scripta Metall. et Mater., 27, pp. 431-436.
 
Maloy, S.A., Heuer, A.H., Lewandowski, J.J., and Mitchell, T.E. (1992). "Dislocations in MoSi2", Acta Met., 40, 11, pp. 3159-3166.
 
1991
 
Mendiratta, M., Dimiduk, D., and Lewandowski, J.J. (1991).  "Ductile Phase Toughening in Two Phase Nb/Nb5Si3 Alloys", Met. Trans. A, 22A, pp. 1573-84.
 
Manoharan, M., and Lewandowski, J.J. (1991). "Mode I - Mode III Fracture in Aluminum Matrix Composites", Journal of Composite Materials, 25, pp. 831-842.
 
Lewandowski, J.J., Liu, D.S., and Liu, C. (1991).  "Observations on the Effects of Particle Size and Superposed Pressure on Deformation of Metal Matrix Composites", Scripta Met., Viewpoint Set #15, 25, no. 1, pp. 21-26.
 
Margevicius, R.W., and Lewandowski, J.J. (1991). "The Effects of Hydrostatic Pressure on the Mechanical Behavior of NiAl", Scripta Met., 25, pp. 2017-2022.
 
Strangwood, M., Hippsley, C.A., and Lewandowski, J.J. (1991). "Interfacial Segregation in Al Based Metal Matrix Composites", in Low Density, High Temperature Powder Metallurgy Alloys, (M. Koczak, et. al. eds.) TMS-AIME, Warrendale, PA, pp. 97-108.
 
Luo, H., Ballarini, R., and Lewandowski, J.J. (1991). "Effects of Superposed Hydrostatic Pressure on the Elastoplastic Behavior of Two-Phase Composites", in Mechanics of Composites at Elevated and Cryogenic Temperatures, (S.N. Singhal, W.F. Jones, C.T. Herakovich, eds.), ASME, NY, pp. 195-216.
 
Maloy, S., Heuer, A.H., Lewandowski, J.J., and Petrovic, J. (1991). "Carbon Additions to MoSi2:  Improved High Temperature Mechanical Properties",  Journal of the American Ceramic Society, 74, 10, pp. 2704-2706.
 
1990
 
Lewandowski, J.J., and Holroyd, N.J.H. (1990). "Intergranular Fracture of Al-Li Alloys:  Effects of Aging and Impurities", Materials Sci. and Eng., 123, pp. 219-27.
 
Manoharan, M., and Lewandowski, J.J. (1990). "Fracture Initiation and Growth Toughnesses of an Aluminum Metal-Matrix Composite", Acta Met., 38, pp. 489-96.
 
Manoharan, M., and Lewandowski, J.J. (1990). "Microstructural Effects on the Toughness of Aluminum Alloy Based Metal-Matrix Composites", Fundamental Relationships Between Microstructures and Mechanical Properties of Metal Matrix Composites", (M.N. Gungor and P.K. Liaw, eds.), TMS-AIME, Warrendale, PA, pp. 145-61.
 
Liu, D.S., Rickett, B.I., and Lewandowski, J.J. (1990).  "Effects of Low Levels of Superimposed Hydrostatic Pressure on the Mechanical Behavior of Aluminum Matrix Composites", Fundamental Relationships Between Microstructures and Mechanical Properties of Metal Matrix Composites", (M.N. Gungor and P.K. Liaw, eds.), TMS-AIME, Warrendale, PA, pp. 471-79.
 
Lewandowski, J.J., Michal, G.M., Locci, I., and Rigney, J.D. (1990).  "Fracture Toughness and Effects of Stress State on Aluminides", in Proc. Materials Research Symposium, (G.M. Stocks, A. Giamei, and D. Pope, eds.), Vol. 186, MRS, Pittsburgh, PA., pp. 341-348.
 
Liu, D.S., and Lewandowski, J.J. (1990). "Effects of Superposed Pressure on Mechanical Behavior of an MMC", in Proc. Second International Ceramic Sci. and Tech. Congress - Advanced Composite Materials, Westerville, OH., (M.D. Sacks, et. al. eds.), pp. 513-518.
 
Rigney, J.D., and Lewandowski, J.J. (1990). "In-situ Studies of Ductile Phase Toughening in Silicides", in Proc. Second International Ceramic Sci. and Tech. Congress - Advanced Composite Materials, Westerville, OH., (M.D. Sacks, et. al. eds.), pp. 519-525.
 
Strangwood, M., Hippsley, C.A., and Lewandowski, J.J. (1990). "Segregation to SiC/Al Interfaces in Al Based Metal Matrix Composites", Scripta Met., 24, pp. 1483-88.
 
Ellis, L., and Lewandowski, J.J. (1990).  "Laminated Composites with Improved Bend Ductility Toughness", Journal Materials Science Letters, 10, pp. 461-63.
 
Manoharan, M., Ellis, L., and Lewandowski, J.J. (1990). "Laminated Composites with Improved Toughness", Scripta Met., 24, pp. 1515-19.
 
Osman, T.M., Lewandowski, J.J., and Hunt, W.H. (1990). "Microstructure-Property Relationships for an Al/SiC Composite with Different Deformation Histories", in Fabrication of Particles Reinforced Metal Composites, (J. Masonnave and F.G. Hamel, eds.), ASM Int'l., Materials Park, OH, pp. 209-16.
 
Manoharan, M., and Lewandowski, J.J. (1990). "In-situ Observation of Crack Growth in Al-MMC's", Scripta Met., 24, pp. 12-18.
 
1989
 
Lewandowski, J.J., Liu, C., and Hunt, W.H. Jr. (1989). "Effects of Microstructure and Particle Clustering on Fracture of Aluminum MMC", Matl’s Sci. & Eng., A107, pp. 241-255.
 
Lewandowski, J.J., Liu, C., and Hunt, W.H. Jr. (1989)."Effects of Microstructure and Particle Clustering on Fracture of an Aluminum Metal Matrix Composite", Interfacial Phenomena in Composites, (S. Suresh and A. Needleman, eds.), Elsevier, pp. 241-257.
 
Lewandowski, J.J., Liu, D.S., and Manoharan, M. (1989). "Effects of Hydrostatic Pressure on Fracture of a Particulate Reinforced MMC", Scripta Met., 23, pp. 253-256.
 
Lewandowski, J.J., and Manoharan, M. (1989). "Effects of Notch Root Radius on Fracture Toughness of Metal Matrix Composites", Int’l. Journal Fracture, 40-2, R31-34.
 
Lewandowski, J.J., Liu, D.S., and Manoharan, M. (1989). "Effects of Microstructure on Fracture of an Aluminum Alloy and an Aluminum Composite Tested Under Low Levels of Superimposed Pressure", Met. Trans. A, 20A, pp. 2409-17.
 
Lewandowski, J.J., Manoharan, M., and Liu, C. (1989). "Microstructure and Particle Size Effects on Fracture in Aluminum Metal Matrix Composites", Advances in Fracture Research - ICF-7, (K. Salama, ed.), Pergamon Press, Vol. 4, pp. 2977-2987.
 
Lewandowski, J.J., and Liu, D.S. (1989). "Pressure Effects on Fracture of Composites", Lightweight Alloys for Aerospace Applications, (E.W. Lee, F.H. Chia, and N.J. Kim, eds.), TMS-AIME, Warrendale, PA, pp. 359-364.
 
Manoharan, M., and Lewandowski, J.J. (1989). "Effects of Aging Condition on the Fracture Toughness of 2XXX and 7XXX Aluminum Composites", Scripta Met., 23, pp. 301-305.
 
Lewandowski, J.J. (1989). "Processing and Mechanical Properties of Lightweight Structural Composites", SAMPE Quarterly, 20, pp. 33-37.
 
Khadkikar, P., Vedula, K.M., and Lewandowski, J.J. (1989).  "Notch Effects on Tensile Behavior of Ni3Al and Ni3Al+ B", Met. Trans. A, 20A, pp. 1247-1255.
 
Manoharan, M., and Lewandowski, J.J. (1989). "In-situ Deformation Studies of an Alum­inum Metal-Matrix Composite in a Scanning Electron Microscope", Scripta Met. 23, pp. 1801-1804.
 
Liu, D.S., Manoharan, M., and Lewandowski, J.J. (1989). "Matrix Effects on the Ductility of Aluminum Based Composites Tested Under Hydrostatic Pressure", Journal of Materials Science Letters, 8, pp. 1447-1449.
 
Liu, D.S., Manoharan, M., and Lewandowski, J.J. (1989). "Effects of Microstructure on the Behavior of an Aluminum-Alloy and an Aluminum Matrix Composite Tested Under Low Levels of Superimposed Hydrostatic Pressure", Metallurgical Transactions A, 20(11), pp. 2409-2417.
 
Manoharan, M. and Lewandowski, J.J. (1989). “Effects of Changes in Notch Radius on Toughness of Aluminum based MMC’s”, Int’l Journal of Fracture, 40, pp. R31-34.
 
1988
 
Lewandowski, J.J., and Hippsley, C.A. (1988). "The Nucleation of High Temperature Brittle Intergranular Fracture in 2¼ Cr - 1 Mo Steel", Met. Trans. A, 19A, pp. 3005-3011.
 
Khadkikar, P., Rigney, J., Lewandowski, J.J., and Vedula, K.M. (1988). "Notch Effects on Tensile and Bend Properties of Ni3Al and Ni3Al+B", Proc. Materials Research Symposium, (C.C. Koch, N.S. Stoloff, C.T. Liu, and A.J. Taub, eds.), Pergamon Press, Vol. 133, pp. 523-528.
 
Rigney, J., Khadkikar, P., Lewandowski, J.J., and Vedula, K.M. (1988). "Strength and Toughness of Composite Materials Based on Nickel Aluminide Matrices", Proc. Materials Research Symposium, (C.C. Koch, N.S. Stoloff, C.T. Liu, and A.J. Taub, eds.), Pergamon Press, Vol. 122, pp. 603-608.
 
Liu, C., Pape, S., and Lewandowski, J.J. (1988). "Effects of Matrix Microstructure and Interfaces on Influencing Monotonic Crack Propagation in SiC/Aluminum Alloy Com­posites", Proceedings of ICCI-II, (H. Ishida, ed.), Elsevier, N.Y., pp. 513-25.
 
Lewandowski, J.J., Dimiduk, D., and Mendiratta, M. (1988). "Fracture of Nb-Nb-Silicide Composites", Proc. Materials Research Symposium - High Temperature Composites, (S. Fishman, F. Lemkey, A.G. Evans, eds.), Pergamon, Vol. 20, pp. 103-109.
 
Kim, Y.S., Holroyd, N.J.H., and Lewandowski, J.J. (1988). "Pb-Induced Solid Metal Embrittlement of Al-Mg-Si Alloys at Ambient Temperatures", in Proc. International Conf. on Environ­ment-Induced Cracking of Metals, (M.B. Ives, ed.), NACE, Houston, TX, pp. 371-377.
 
Lewandowski, J.J., and Liu, C. (1988). "Microstructural Effects on Fracture Micro­mechanisms in Lightweight Metal Matrix Composites", in Proc. International Symposium on Adv. Structural Materials, (D. Wilkinson, ed.), Proc. Met. Soc. of Canadian Inst. Mining and Metallurgy, Pergamon Press, Vol. 2, pp. 23-33.
 
1987
 
Lewandowski, J.J., and Thompson, A.W. (1987). "Modelling Cleavage Fracture in Fully Pearlitic Microstructures", Acta Met., 35, pp. 1453-1462.
 
Lewandowski, J.J., Hippsley, C.A., Ellis, M.B.D., and Knott, J.F. (1987). "Impurity Effects on Sustained Load Cracking of 2¼ Cr-1 Mo Steels:  I Crack Initiation", Acta Met., 35, pp. 593-609.
 
Lewandowski, J.J., Hippsley, C.A., Kohler, V., and Knott, J.F. (1987). "Impurity Effects on Sustained-Load Cracking of  2¼ Cr-1 Mo Steels: II Crack Propagation", Acta Met., 35, pp. 2081-2091.
 
Lewandowski, J.J., Kohler, V., and Holroyd, N.J.H. (1987).  "Effects of Pb on Sus­tained Load Cracking of Al-Mg-Si Alloys at Ambient Temperatures", Matl’s Sci. and Eng., 96, pp. 185-195.
 
Lewandowski, J.J., Liu, C, and Hunt, W.H. (1987). "Microstructural Effects on Fracture of SiC Particulate Reinforced 7XXX Aluminum Alloys", Powder Metallurgy Composites, (P. Kumar, K.M. Vedula, and A.M. Ritter, eds.), TMS-AIME, Warrendale, PA, pp. 117-39.
 
1986
 
Alexander, D.J., Lewandowski, J.J., and Thompson, A.W. (1986). "Yielding and Work Hardening Effects in Notched Bend Bars",  J. Mech. Phys. Solids, 34, pp. 433-454.
 
Lewandowski, J.J., and Thompson, A.W. (1986).  "Microstructural Effects on Ductility in Fully Pearlitic Steels", Met. Trans. A, 17A, pp. 461-472.
 
Lewandowski, J.J., and Thompson, A.W. (1986). "Microstructural Control of the Cleavage Fracture Stress in Fully Pearlitic Steels", Met. Trans. A, 17A, pp. 1769-1786.
 
Lewandowski, J.J., Ellis, M.B.D., and Knott, J.F. (1986). "Effects of Impurity Level and Test Environment on Sustained Load Cracking of 2¼ Cr - 1 Mo Steel", Fracture Control of Engineering Structures - ECF 6, (H.C. Van Elst and A. Bakker, eds.), EMAS, Amsterdam, Vol. 3, pp. 1905-1915.
 
Lewandowski, J.J., and Thompson, A.W. (1986). "Hydrogen Effects on Cleavage Fracture in Fully Pearlitic Eutectoid Steel", Fracture Control of Engineering Structures - ECF-6, (H.C. Van Elst and A. Bakker, eds.), EMAS, Amsterdam, Vol. 3, pp. 1985-1995.
 
1985
 
Lewandowski, J.J., and Knott, J.F. (1985). "Microstructural Effects on Flow Localization in 7XXX Al Alloys", Strength of Metals and Alloys - ICSMA 7, Pergamon Press,  Vol. 2, pp. 1193-1200.
 
Ellis, M.B.D., Lewandowski, J.J., and Knott, J.F. (1985).  "Impurity Effects on Sustained Load Cracking of 2¼ Cr - 1 Mo Steel", Strength of Metals and Alloys - ICSMA 7, Pergamon Press, Vol. 2, pp. 1087-1194.
 
1984
 
Lewandowski, J.J., and Thompson, A.W. (1984). "Microstructural Effects on the Cleavage Fracture Stress in Fully Pearlitic 1080 Steel", - Advances in Fracture Research ICF6, Vol. 2, (S.R. Valluri, D.M.R. Taplin, P. Rama Rao, J.F. Knott, R. Dubey, eds.), Pergamon Press, pp. 1515-1522.
 
1983
 
Lewandowski, J.J. (1983).  "Hydrogen Effects on Cleavage Fracture in Fully Pearlitic 1080 Steel", Ph.D. Thesis, Carnegie-Mellon University.
 
1981
 
Christodoulou, L., Stevens, M.F., Lewandowski, J.J., Bernstein, I.M., and Thompson, A.W. (1981).  "Studies in Microstructural Effects in Hydrogen Embrittlement of Steels", Environmen­tal Degradation of Engineering Materials, Proc. Third Int’l. Conf. on Environmen­tal Degradation of Engineering Materials, (M.R. Louthan, Jr., R.P. McNitt, and R.D. Sisson, Jr., eds.), Va. Tech. Printing, Blacksburg, VA, pp. 161-75.
 
1980
 
Lewandowski, J.J., and Thompson, A.W. (1980).  "The Effect of Austenite Stability on the Sustained-Load Cracking of Stainless Steels in One Atmosphere Hydrogen", Hydrogen Effects in Metals, Proc. Third Int’l. Conf. on Hydrogen, (I.M. Bernstein and A.W. Thompson, eds.), TMS-AIME, Warrendale, PA, pp. 629-37.